FOREVIEW Engineering is the manufacturer & supplier of the Secondary Packaging Machines and entire operations from start to end of line packaging. We believe in providing a wide range of automated secondary packaging machine solutions that meet our client expectations for packing requirements effectively.
The purpose of Secondary Packaging is to protect and provide branding of primary packaged products.
Sh r in k Wrappin g M ach in e l ike any packaging process involves Preparation of wrapping material (film), Preparation of product, Enclosing (wrapping) in a sleeve of LDPE film then Shrinking/cooling and discharge. There are three main process of Fully Automatic Shrink Wrap machine, like product Collation, wrapping mechanism and Shrink Tunnel.
Machine becomes Semi-Automatic when collation or Wrapping process is done manually. Shrink-wrapping Machine Each part of the process including the product itself can affect the speed, versatility, and quality resultant pack.
Shrink wrapping System will be suitable to accept your pack. The machine shall have an output of 3 to 4 packs/minute with the consist of three sections below:
FILM WRAPPING / SEALING
The pack which is transferred from the feeding table to wrapper conveyor carries the film along with it. A Moisturized Film Unwinding system shall be provided to unwind adequate amount of film required for wrapping. A dancing roller with a proximity switch shall be provided to unwind the necessary film.
The front sealing jaw shall have a sealing of suitable width. This jaw will have a continuous arrangement for cutting and sealing of film. The temperature of the sealing head shall be controlled with help of a Temperature Controller ( Continuous Heating ). At the time of wrapping the pack shall also be held from top with the help of an Pneumatic arrangement. The push of the next pack transfers the bottles onto the Shrink tunnel Conveyor Belt.
SHRINK TUNNEL
The Shrink Tunnel shall be fabricated from Mild Steel structural with Mild steel paneling duly primed and painted. The design of the machine shall be suitable to accept your pack size. The Shrink Tunnel shall consist of a Heating chamber, which shall be well insulated with Rock wool, to reduce loss of heat.
The Shrink Tunnel also consists of a chain conveyor linked with G. I. Mesh. The conveyor motion shall be of continuous type. The conveyor shall be driven by a D.C. Motor through a Gear Box, to achieve speed variation for ensuring a proper shrinkage. A cooling fan shall be provided at the exit end to ensure a tight wrap. The necessary idle conveyor shall be given for easy collection of pack.
Forview Engineering & Technology Pvt.Ltd
Plot No. A 362,
TTC Industrial Area,
MIDC Mahape,
Navi Mumbai 400710
Mumbai – Maharashtra
GST Number: 27AABCF9202H1zs