Lane Divider system will be installed after the bottle/cartooning machine, after labeling or before labeling as per requirement. but the purpose of lane divider system to feed /distribute the products equally into proposed /existing lanes to make required matrix to fulfill the next line requirements like for shrink-wrap or for pick and place of the matrix .

Lane divider works with 2 main sections of system 1, Arm Assembly with servo motor and 2, Proximity sensor section. The lane divider is installed by studying the product moving direction and conveyer moving direction.

The bottles coming out from labeling machine makes a single line and travel in a single line and enter into funnel (Tale Side) of D-ARM (Distribution Arm) enters into ARM Cavity. As there is a solenoid valve mounted in front (Discharge side) of the D-ARM to hold the bottles and feed uniformly to proposed/set partitions.

• From 1 to 8 lanes in a compact footprint

• Handling of a wide range of products

• Distribution without stopping the flow of products: the longitudinal movement of the arm, at the same speed as the conveyor, means that the products are never blocked when changing lanes

• Guide design and position adapted to the product (shape, resistance, label, etc.)

• No need to create a space between products whose shape enables detection. Creation of a space only for shapes such as cartons, cube-shaped products, etc.

• Easy access to setting points

• Reduced noise level